Remove and replace a window in 3 quick steps
Most people think window replacement and automatically start Googling “Window Replacement”. I’m here to share with you that you can do it yourself. Chances are, that is how you found this blog; because you were looking for tips on how to remove and replace a window, DIY window replacement, and many other home renovation projects.
Step 1. Remove the interior trim.
Now this can be done with various tools but the preferred tools continue to be a Painter’s tool and a Pry bar. These are 2 tools that I didn’t always have in my tool box but I do now. You’ll notice that each has it’s own advantage when removing a window. 1 may be able to get into smaller cracks and crevices. While at times, the other may provide better leverage for prying off interior trim. Also, on some windows I experienced better success starting with the right side of the window frame and removing that side’s trim first.
Step 2. Remove the Window Stop
After removing the window trim, you need to remove the window stop to access the window sashes. This will be a quicker process than removing the trim but it still requires some patience.
Step 3. Insulate the replacement window with spray foam.
Lastly, when you pop that replacement window in to that empty frame you are going to need some insulation. I recommend using spray foam. It’s messy as heck, so use gloves and avoid getting it on your clothes and anything else. It comes with a tip and there are also many tools for distributing spray foam i.e., spray foam gun, etc.
There you have it, 3 easy steps to remove and replace a window and get the new window in with insulation in place!
See the bonus picture below of the bathroom after finishing the window installation, painting the tiles white, painting the bathroom, installing the vanity mirror and best of all listing and selling the house!
Dr. & Mrs. L